Products & Services
Demand Flow Regulator
Brass Nickel Plated
Demand flow regulator used for calibration gases, pump based instruments and hand held gas detectors.
Demand flow regulator supply gas as demanded by the instrument and automatically shuts off.
Part numbers for regulators
For cylinders with C10 valve : CSL-DFR-BRNP-C10
For cylinder with CGA 600 valve : CSL-DFR-BRNP-CGA600
Specifications:
Maximum inlet pressure | 1200 PSI (C-10 inlet connection) |
Outlet pressure | 40-60 PSIG |
Leak rate | Bubbletight |
Body raw material | Brass Nickel Plated |
Valve housing brass | Nickel Plated |
Bonnet | Aluminum Clear Anodized |
Piston | Brass Natural |
Seals and seats | Viton, Nitrile & Teflon |
Diaphragm | Nitrile |
Flow | 0 to 3L/Min @3” WcVacuum |
Gauge | 0 to 1500 PSIG Brass |
Inlet connection | C-10 (5/8 x 18 UNF) |
Outlet connection | 3/16” Hose Barb |
Fixed Flow Regulator
Brass Nickel Plated
Fixed flow regulator used for calibration gases and industrial safety monitors.
These are available in preset flow setting from 0.1 to 8.0 LPM.
Part Numbers for regulators
a. For cylinders with C10 valve
Flow rate 0.5LPM : CSL-FFR-BRNP-0.5LPM-C10
Flow rate 1 LPM : CSL-FFR-BRNP-1LPM-C10
b. For cylinders with CGA600 valve
Flow rate 0.5LPM : CSL-FFR-BRNP-0.5LPM-CGA600
Flow rate 1 LPM : CSL-FFR-BRNP-1LPM-CGA600
Specifications:
Maximum inlet pressure | 1200 PSI (C-10 inlet connection) |
Outlet pressure | 40-60 PSIG |
Leak rate | Bubbletight |
Body raw material | Brass Nickel Plated |
Bonnet | Brass Nickel Plated |
Piston | Brass |
Seals and seats | Viton & Teflon |
Gauge | 0 to 1500 PSIG Brass |
Inlet connection | C-10 (5/8 x 18 UNF) |
Outlet connection | 3/16” hose barb |
Flow adjustment | Flow of these regulators can be adjusted fromtop using 1/16” hex allan wrench |
Fixed Flow Regulator
SS303
Fixed flow regulator used for calibration gases and inustrial safety monitors.
These are available in preset flow setting from 0.1 to 8.0 LPM.
Part Numbers for regulators
CSL-FFR-SS-0.5LPM-C10
Specifications:
Maximum inlet pressure | 1200 PSI (C-10 inlet connection) |
Outlet pressure | 40-60 PSIG |
Leak rate | Bubbletight |
Body raw material | Brass Nickel Plated |
Bonnet | Brass Nickel Plated |
Piston | Brass |
Seals and seats | Viton & Teflon |
Gauge | 0 to 1500 PSIG Brass |
Inlet connection | C-10 (5/8 x 18 UNF) |
Outlet connection | 3/16” hose barb |
Flow adjustment | Flow of these regulators can be adjusted fromtop using 1/16” hex allan wrench |