BenchTop Model 602 U

Features:

• Analyzes Carbon di Oxide and oxygen Online/bench/portable applications
• Portable, battery operated (optional).
• Range: 0.01 to 100% oxygen & 0.01 to 100% CO2
• Built-in sample pump, probe
• Economically priced
• 0-5 V dc / 4-20 mA analog outputs and data logging available.

APPLICATIONS

• Incubator Manufacturers
• Food Processing industries
• Meat, Snack foods, Dairy Packaging products.
• Pharmaceutical.
• Controlled atmospheres.

FOOD PACKAGE TESTINGOxygen is highly degrading gas for various packaging applications. A modified atmosphere packaging depends heavily on package integrity and efficiency of the packaging machine. Oxygen measurements with the Model 602µ can be done using a small probe which has a needle and low volume for detection of oxygen when package size very small. The same unit can be attached to the nitrogen generator system for continuous monitoring of purity of nitrogen produced. With the Model 602µ routine check of packages can scan defective packaging seal or sealing equipment, increasing the efficiency of your packaging line.
COLD ROOM’S AND WAREHOUSE APPLICATIONSThe Model 602µ can be used in all food processing and storage applications, including meats, fresh produce, dairy products. The sensor is unaffected by high levels of background gases such as nitrogen or carbon dioxide. The Model 602µ can be applied where mixtures are used and the desired oxygen and Carbon Di-Oxide level is very high (25 to 100%). It has a rugged electrochemical sensor for Oxygen and NDIR sensor for Carbon Di-Oxide having a continuous life of more than 2 years. It is no response towards hydrocarbons typical to the food processing and storage industry.
CONTROLLED/MODIFIED ATMOSHERE OXYGEN MEASUREMENTS In many modified and controlled atmosphere applications nitrogen is used for flushing to remove as much oxygen as possible from the package or the cold rooms/warehouses to extend shelf life of various perishable commodities. Also measurement of CO2 becomes critical as it reduces the life of the commodities in many cases. Depending on the commodity, maximum oxygen level can vary greatly, from 0.1 % to 5% or even higher.
O.E.M INCUBATORS MANUFACTURERS The Model 602µ is a bench top unit housed in a standard rack mounted metal enclosure. The unit is specially designed so that it gives a value addition to the incubator at a very economical price. The analyzer is can be configured for continuous monitoring of incubator atmosphere and also a built in PID controller for temperature control. The instrument is provided with two analog outputs (0-5 Vdc and 4-20mA) and two relay contacts for high alarm and low alarm for any process control if required. .
ACCESSORIES AND EXPANDABILITY Sampling PumpThe Model 602µ has a built-in pump which can be programmed through software for ON and OFF times. Manual control is also provided in the system.
Sampling ProbeSample is drawn through various options. For online measurement the instrument has an moisture filter in series with sensor so that the sensor is protected from unwanted moisture and dust. The instrument also has an attachment which consists of a probe, a needle connected to a small diameter Teflon tubing. The complete volume of the assembly is very less so that minute quantity of gas is required for sampling. Technical Specifications: